DESCRIPTION

The hype behind the launch of the all-new Ford Bronco was unreal. Now that you finally have that new Ford Bronco in your hands, its time to turn up the juice and add some easy power with the help of Injen Technology.

Injen Technologys new EVO9300c Cold Air Intake for the 2021-2023 Ford Broncos equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and youll know that its the right choice for your new Bronco. The EVO9300c is a true 3D-designed intake system that simply drops in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and youre set with no check engine lights and no drama!

The EVO9300c uses a massive intake tube that starts out at 5.00 inches at the inlet and smoothly tapers down to 3.50in at the turbo. This massive tube allows for huge increases in air volume to feed that hungry turbo for increased performance across the entire RPM band.

EVO9300Cincludes Injens Red 8-Layer Oiled Cotton gauze air filter

Housing and Ram Air Scoop made from Roto-Molded XLPE:
The EVO9300c system features our 1-piece box design that incorporates our patented Twist Lock air filter attachment technology. The box is molded into our fully functional ram air scoop that is twice the size of OE. This increase allows our intake to capture the maximum amount of cool air to feed that hungry turbo.

The EVO9300c also incorporates and adaption point for our upcoming snorkel system. Please note that our system only works with the Injen snorkel and no other OE or aftermarket units.

Intake Tube made from Roto-Molded XLPE:
The EVO9300c Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The tube starts out at a whopping 5.00in and smoothly tapers down to 3.50in for increased air volume and reduced restriction.

8-Layer Oiled Cotton Gauze Air Filter:
The Injen 8-Layer oil cotton gauze air filter is included with the EVO9300C cold air intake. Using the largest filter possible for this application has increased the available air volume, resulting in added power while keeping the installation process quick and simple.

Quality Hardware:
From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit.

Hassle-Free Installation:
Make it easy! By designing this kit in a 3D workspace, youre ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood.

Dyno Proven:
Plain and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your 2.3L Turbo equipped Ford Bronco. After hours of designing and dyno testing, Injen is proud to say that the EVO9300c Evolution Air Intake system puts down numbers of up to 13 additional horsepower and 13 Ft.-lbs. of torque.

Boasting a simple install, patented air filter mounting system, cross-linked XLPE construction, enlarged front-facing scoop that is over twice the size of OE, and an adaption point on the side of the airbox for Injens upcoming snorkel. Add to that some the highest dyno-proven horsepower gains on the market, the clear choice for your Bronco is the EVO9300c by Injen Technology.

KEY FEATURES

Direct Fit for 2021-2023 Ford Bronco L4-2.3L EcoBoostDyno Proven gainsof up to 13 hp and 13 lb.-ft. of torqueMassive intake tube that tapers down from 5in OD to 3.5in for increased airflowLarge forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grilleSecondary Inlet for additional airflow OR to adapt to Injens upcoming snorkel systemNo Tune Required – Designed to work seamlessly with the stock calibrationUnlike the competition, the Injen intake tube goes all the way to the turboAggressive under-hood appearance while maintaining an OE fitUtilizes our patented Twist-Lock Filter attachment systemDurable XLPE Roto-Molded Polyethylene tube and housingReinforced automotive-grade silicone couplersFully serviceable Injen 8-Layer Oiled Cotton Gauze air filterReplacement air filter part number X-1116-BROptional Injen air filter cleaning kit part number X-1030Stainless steel band clamps with inner protective linerAggressive under hood appearance while maintaining an OE fitOur clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.Made in Pomona California, USAInjen Technology Limited Lifetime Warranty