Oil Supply Line and gasket set included!

Subaru Green HTZ

• Compressor wheel – 76HTZ
• Flow rating – 61LB per minute
• CW Measurements – 54.8MM Inducer / 76MM Exducer
• TW Measurements – 67.3MM Inducer / 58.8MM Exducer
• Compressor Housing – 60MM Small Inlet or 84MM FAP Cover
• Turbine Housing – FP 8CM Subaru Turbine Housing
• CHRA – FP Journal Bearing
• Oil Line – Included

TheFP Greenturbocharger for the Subaru WRX/STi features the 76HTZcompressor section with your choice of 60MM small inlet or the 84MMFlow Advancement Portcompressor cover coupled to the 8cm2 turbine housing. TheFP Greenflows 61LB a minute and is capable of producing upwards of 500WHP.

In the past we have sold two different types of oil lines. They were known as Type 1 or Type 2, and it was too easy to get confused as to the type needed due to various model differences across the years. To solve this problem, we developed a new oil feed line that includes the parts for both Type 1 and Type 2 cars. The installation instructions below will show which parts to use based on which type of car you have, which is why we are still using the Type 1 and 2 designators.

Subaru Oil Feed Line Installation Instructions

Porting is available for this turbocharger. Please take a look at our Porting Services page for examples.

84MM FAP Cover Requires TGV Housingsto fit in stock location

Subaru Oil Line PSA