Delphi Series 7000 Fuel Module
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure.
Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 m filtration.
The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.
Features and Benefits:
- Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
- Single stage turbine pump provides quiet, energy efficient operation
- Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
- Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
- High capacity filter media helps supply clean fuel to the injection system
- Available serviceable in-tank fuel filter for markets with poor quality fuels
Delphi Lifetime Warranty
Delphi Corporation (Delphi) warrants all Electric Fuel Pump and Fuel Pump Assembly products by Delphi Product and Service Solutions to be free of defects in material and workmanship for as long as you own the vehicle in which the Delphi Electric Fuel Pump or Fuel Pump Assembly was installed. These products include Electric Fuel Pumps, Electric Fuel Pump Assemblies and any other components packaged with these products as supplied by Delphi.
Delphi
Delphi is an Original Equipment supplier to over 25 vehicle manufacturers and is the largest and most diversified supplier of automotive parts to the global aftermarket.
Specifications
Item Grade:Standard ReplacementPackage Contents:Fuel Pump and Strainer Set, Clamps, Zip Ties, Instruction SheetSystem Pressure:44 psiOutlet Outside Diameter:0.375INVoltage:12.02HFuel Type:GasMaximum Pressure:80.0PSTerminal Type:BladeGasket Or Seal Included:NoTerminal Quantity:2Terminal Gender:MaleWiring Harness Included:YesStrainer Included:YesInlet Type:StrainerOutlet Type:Female HoseIn Tank or External:In TankInternal Or External Strainer:InternalAverage Current Draw:868Average Flow Rating:17GPHPump Type:Electric
OE Part # 1HM-919-051-M / 1HM919051 M / 1HM 919 051 M / 1HM919051M
MFR Part # FG1122-11B1
Reviews
There are no reviews yet.