aFe – 2019-2020 Hyundai Veloster N L4-2.0L (T) Takeda Turbo Inlet w/ Takeda Intake

Improves Air Flow:

This turbo inlet is the perfect addition to the Takeda intake. It removes the air flow restriction of the factory turbo inlet and guarantees the maximum air flow to the turbo for maximum power. It provides a smooth transition for the air from the Takeda air intake tube to the turbo with the minimum restriction.

Aluminum CNC machined adapter:

Precisely CNC machined out of 6061-T6 billet aluminum, the adapter mounts directly onto the turbo and guides the increased air flow from the Takeda intake into the turbo. It is black anodized for durability and a stealthy appearance.

Reinforced Silicone Coupling:

This turbo inlet utilizes a flexible silicone coupling that is reinforced with molded ribs, making it resistant to wear and deterioration. The silicone coupling mates directly to the aluminum turbo adapter and the Takeda air intake tube. All necessary clamps are provided.

Hassle-Free Installation:

All necessary clamps and hardware are provided for a fast and easy installation. The factory harness bracket mounts directly onto the aluminum adapter for perfect fitment.

Fitment Note:

This item will only fit models equipped with the Takeda intake system. For vehicles equipped with OE intake, see part number 59-20001.

Emission Note:

This turbo inlet is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

Product Details

• Outflows Factory Turbo Inlet by 26% (Turbo Inlet Only)
• Measured Flow: 295 CFM @ 7″ H20 (Turbo Inlet Only)
• Improves Air Flow To The Turbo For Maximum Power
• Turbo Adapter CNC Machined From 6061-T6 Billet Aluminum And Black Anodized
• Black Silicone Reinforced Coupling Connects To Factory Intake Tube
• Direct Fit Install with No Modifications Required
• Fits only with Takeda air intake system
• Air flow chart
• Installation instructions

Fitment

aFe’s Warranty

For information on aFe’s warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.

This turbo inlet is the perfect addition to the Takeda intake. It removes the air flow restriction of the factory turbo inlet and guarantees the maximum air flow to the turbo for maximum power. It provides a smooth transition for the air from the Takeda air intake tube to the turbo with the minimum restriction. Precisely CNC machined out of 6061-T6 billet aluminum, the adapter mounts directly onto the turbo and guides the increased air flow from the Takeda intake into the turbo. It is black anodized for durability and a stealthy appearance. This turbo inlet utilizes a flexible silicone coupling that is reinforced with three layers of polyester material, making it resistant to wear and deterioration. The silicone coupling mates directly to the aluminum turbo adapter and the Takeda air intake tube. All necessary clamps are provided. All necessary clamps and hardware are provided for a fast and easy installation. The factory harness bracket mounts directly onto the aluminum adapter for perfect fitment. This item will only fit with Takeda air intake systems P/N: 56-10021D , 56-10021R, 56-70021D and 56-70021R . It will NOT fit with the factory air intake system. For use with factory air intake system, see part number 59-20001.
Installation Instructions
Installation Instructions

This Part Fits: